DRILLS
The Bauer BG28H is optimized for a variety of drilling techniques with increased efficiency that leads to higher productivity and lower fuel consumption. The BG28H is equipped with an efficient CAT engine, a high-performance hydraulic system and operates at a weight of approx. 220,000lbs (100t).
HFDI utilizes this model of drill for the following specialized drilling technologies.
Cased kelly drilling for foundation piles and secant piles.
Cased kelly drilling with oscillator.
Kelly drilling open hole or supported by drilling fluid.
Rock drilling.
Continuous flight auger drilling.
Displacement pile drilling.
Single axis soil mixing.
The Bauer BG30V is optimized for a variety of drilling techniques with increased efficiency that leads to higher productivity and lower fuel consumption. The BG30V is equipped with an efficient CAT engine, a high-performance hydraulic system and operates at a weight of approx. 240,000lbs (110t).
HFDI utilizes this model of drill for the following specialized drilling technologies.
Cased kelly drilling for foundation piles and secant piles.
Cased kelly drilling with oscillator.
Kelly drilling open hole or supported by drilling fluid.
Rock drilling.
Continuous flight auger drilling.
Displacement pile drilling.
Single axis soil mixing.
CSM (cutter soil mixing).
The Bauer BG36V is optimized for a variety of drilling techniques with increased efficiency that leads to higher productivity and lower fuel consumption. The BG36V is equipped with an efficient CAT engine, a high-performance hydraulic system and operates at a weight of approx. 280,000lbs (127t).
HFDI utilizes this model of drill for the following specialized drilling technologies.
Cased kelly drilling for foundation piles and secant piles.
Cased kelly drilling with oscillator.
Kelly drilling open hole or supported by drilling fluid.
Rock drilling.
Continuous flight auger drilling.
Displacement pile drilling.
Single axis soil mixing.
The Bauer BG39V is optimized for a variety of drilling techniques with increased efficiency that leads to higher productivity and lower fuel consumption. The BG39V is equipped with an efficient CAT engine, a high-performance hydraulic system and operates at a weight of approx. 310,000lbs (140t).
HFDI utilizes this model of drill for the following specialized drilling technologies.
Cased kelly drilling for foundation piles and secant piles.
Cased kelly drilling with oscillator.
Kelly drilling open hole or supported by drilling fluid.
Rock drilling.
Continuous flight auger drilling.
Displacement pile drilling.
Single axis soil mixing.
The Bauer BG40V is optimized for a variety of drilling techniques with increased efficiency that leads to higher productivity and lower fuel consumption. The Bauer BG40V is equipped with an efficient CAT engine, a high-performance hydraulic system and operates at a weight of approx. 330,000lbs (150t).
HFDI utilizes this model of drill for the following specialized drilling technologies.
Cased kelly drilling for foundation piles and secant piles.
Cased kelly drilling with oscillator.
Kelly drilling open hole or supported by drilling fluid.
Rock drilling.
Continuous flight auger drilling.
Displacement pile drilling.
Single axis soil mixing.
CSM (cutter soil mixing).
The Fundex F3500 is one of the largest machines in the range of Fundex multifunctional foundation rigs. The F3500 is used for a variety of drilling and pile-driving methods such as soil displacement drilling, CFA drilling, cast-in-situ and pre-cast pile-driving. The cabin can be swiveled out to provide a good view of the work. The extension pieces for the leader are fed in from the bottom, which is beneficial in limited spaces and makes for easy and fast installation. The strong tubular leader is suitable for torque of 500kNm over the entire length. Because of the unique leader construction, it is possible to lower the leader 35 meters beneath the soil level. Stability of the F3500 is high thanks to front and rear supports and a low centre of gravity. Because of the use of an additional powerpack the transport weight is low.
Technical specifications:
DEUTZ 6-cylinder engine.
310 hp / 227 kW engine power.
Bosch-Rexroth, max. 275 – 300 l/min. at 320 bar hydraulic pump.
Winches:
– 1 x 15 tonnes (vertical movement of the leader)
– 1 x 12.5 tonnes (pull up)
– 1 x 12.5 tonnes (pull down or pile winch)
– 1 x 5 tonnes (auxiliary winch for rotating JIB)
– 1 x 5 tonnes (pile winch)
– 1 x 1.5 tonnes (auxiliary winch)
– 1 x 0.9 tonnes (lift winch)50 ton pull down capacity.
100 tons with 35-meter-long leader (80 tons if 40 metres).
Length of leader:
– Minimum 25 metres (82 ft)
– Standard 35 metres (114.8 ft)
– Optional 40 metres (131.2 ft)
The Soilmec SR30 is optimized for a variety of drilling techniques with increased efficiency that leads to higher productivity and lower fuel consumption. The SR30 is equipped with an Deutz engine, a high-performance hydraulic system and operates at a weight of approx. 85,000lbs (39t).
HFDI utilizes this model of drill for the following specialized drilling technologies.
Cased kelly drilling for foundation piles and secant piles.
Kelly drilling open hole or supported by drilling fluid.
Rock drilling.
Continuous flight auger drilling.
The Bauer BG20H is optimized for a variety of drilling techniques with increased efficiency that leads to higher productivity and lower fuel consumption. The BG20H is equipped with an efficient CAT engine, a high-performance hydraulic system and operates at a weight of approx. 140,000lbs (64t).
HFDI utilizes this model of drill for the following specialized drilling technologies.
Cased kelly drilling for foundation piles and secant piles.
Kelly drilling open hole or supported by drilling fluid.
Rock drilling.
Continuous flight auger drilling.
Displacement pile drilling.
Single axis soil mixing.
The Bauer BG18H is optimized for a variety of drilling techniques with increased efficiency that leads to higher productivity and lower fuel consumption. The BG 18H is equipped with an efficient CAT engine a high-performance hydraulic system and operates at a weight of approx. 132,000lbs (60t).
HFDI utilizes this model of drill for the following specialized drilling technologies.
Cased kelly drilling for foundation piles and secant piles.
Kelly drilling open hole or supported by drilling fluid.
Rock drilling.
Continuous flight auger drilling.
Displacement pile drilling.
Single axis soil mixing.